So, you have been contemplating breathing new life into your uPVC windows or doors, with a splash of colour? uPVC spray painting is the fastest route to giving your home a facelift at a modest cost compared to replacing everything outright. However, before you do all that with the spray can, or before hiring professional uPVC spray painters, such as PBM Paints , it is always a good idea to understand what you are getting into, most importantly in terms of money.
In this article, are five factor that could affect the ultimate charge you would have to bear for your project.
- Quality of uPVC material
First off, let’s talk about the quality of your uPVC. Not all uPVC is created equally. It’s in this respect that material quality can really make a big contribution towards the final cost of your spray-painting project.
With a premium, undamaged uPVC product, paint is better retained. With chipping and peeling minimal, less preparation work, such as sanding and priming is needed. Which then reduces the cost. While if the uPVC is older or low grade, it will likely require a bit more attention. Which translates to additional costs required to have the surface prepared, and ready for a new coat of paint.
- Surface Preparation
Now let’s get onto the most important part of working with any paint: surface preparation. Think of it almost like when you wash and exfoliate your face, before you put on all your make-up. The same goes for uPVC paint spraying.
Sanding further smooths the paint, but it is not always necessary. If your uPVC is fine and does not require this step, then that is some few bucks spared. If you’ve got a rough or uneven surface, sanding would be necessary, which comes with added labor costs.
Finally, priming is a very important step. Some uPVC surfaces really benefit from priming, especially when going for lighter over darker colours. Priming adds more cost, but is well worth it in terms of keeping the paint job sharp for years to come.
- Type of Paint Used
There are a few different kinds of paints that goes well with uPVC. Some are relatively cheap, while others will set you back quite a few bucks. Better-quality paints are usually, but not always, the more expensive option. Though they generally offer longevity and the ability to resist fading. Paints at a cheap price may save money in the short run, but might need repainting soon.
- Labor Costs
Ahh, labor costs, probably one of the biggest chunks out of your budget. Whether you do the job yourself or have someone do it, labor is one big factor for the overall cost of uPVC spray painting. If you’re a do-it-yourselfer, you might be able to save a little by taking care of the job yourself. Keep in mind that this isn’t as simple as it looks.
If you have no experience, you could end up with streaks, drips, or not even a finish that could mean spending more time and money on a fix. On the other hand, hiring professional will translate to a smooth and even finish, although it will come at a higher cost.
- Size and Complexity of the Project
The bigger the size and complexity of your project, the more you will end up paying. For example, if you’re just painting a few windows, you may not be looking at a huge bill, however, if you’re getting them all done, that is, all the windows, doors, and maybe even a conservatory, your will bill creeps up very fast.
Next comes complexity, things are pretty easy if you want everything to be painted the same colour. However, if you want complex designs, several colours, or specific finishes like a matte or gloss finish, this is going to increase the time and effort, along with the material costs.
Final Thoughts
Just before you start your next project or renovate, take the time to genuinely consider each of the above factors. A little research and planning can save you from some nasty surprises, and ensure the best possible results according to your available budget. After all, a fresh coat of paint will work wonders for your home, and if done right, does not need to be pricey.
To read more, Click Here
